Overview
Toupret Quick Dry Joint, Skim & Fill is a versatile powder filler for speedy surface finishing, filling, and jointing of interior surfaces. Quick & easy to mix, and ready to paint over in 3 hours, it's also effortless to sand and applies smoothly in one coat, with no shrinkage or depth limit, making it an ideal solution for rapid, seamless results.
- Ideal for jointing & skimming plasterboard
- Fills & repairs holes, gaps, cracks
- Can also be used for more substantial levelling applications
- Ready to paint in just 3 hours
- Will not shrink
- No depth limit
- Compliant with BS EN 13963 for jointing applications
- Colour: White
| Area | Interior |
| Recommended Use | Gypsum, plasterboard, old painted surfaces, cement, concrete, cellular concrete and primed wood. |
| Drying Time |
Ready to be painted: 3 hours (after complete drying) Working time: 40 minutes |
| Re-Coat Time | When the first coat of filler is hard and dry to the touch - 45 mins to 1 hour |
| Application Method | Filling knife, Trowel or Blade |
| Clean Up | Product residue can be rubbed off tools when dry - water cleaning is not necessary |
Preparation
Substrates must be hard, cohesive, clean, and sound.
Substrates to be prepared as per the current trade practices.
Application
- Add powder to water at room temperature. Mixing rate for filling: add 380ml water per 1kg powder (38%) - Mixing rate for skimming: add 420ml water per 1kg powder (45%).
- Stir until smooth.
- Apply manually using a coating blade or trowel. There is no fill depth limit.
- The typical recommended application thickness for plasterboard skimming and jointing is 0.5mm. This product can also be used for more substantial levelling applications. For normal applications, 1 coat is needed, for extreme applications, more than 1 coat may be necessary.
- The surface can be painted 3 hours after application depending on the substrate, coat thickness, and ambient conditions. Toupret Quick Dry Joint, Skim & Fill can be overcoated with any type of filler, paint or wall coating. Do not coat directly with polyurethane paints nor epoxy solvent-based paints.
1.1 kg covers about 1m² at 1mm depth.
Note: It is recommended to wear gloves and glasses while applying this product. Do not apply at a temperature below 8°C or above 35°C nor at a relative humidity over 70%.
Always follow manufacturer's usage instructions and refer to the technical data sheet
Aftercare & Storage
Dispose of unused product and packaging responsibly at your local waste collection centre.
Guaranteed for 12 months from purchase when used as intended, kept in its original sealed packaging and stored away from humidity.
